The IC-A120E is a high-performance mobile radio ground station for mobile use with EN 300 676-2 approval

• 200 memory channels with channel names
• Active Noise Canceling
• Optional Bluetooth unit (UT-133)
• IP54 dust and water protected
• 8.33kHz / 25kHz channel spacing
• Easy handling

The radio with its dot matrix display is excellent readable, so you can see the signs and symbols well. Memory channels and other settings can be easily made by the user through the front panel controls. Pre-programming for the various functions further simplifies handling for the user.

Active Noise Canceling (ANC)
The ANC function (active interference suppression) reduces the background noise of the transmitted and received signal. This feature is particularly useful on airfields where the noise of the engines or engines can significantly affect radio communications. The automatic disturbance limiter (ANL) acts on pulsed disturbances as e.g. caused by car ignitions -> the ANL and ANC function can not be used simultaneously.

Optional Bluetooth® headset usable
If an optional Bluetooth® unit UT-133A is installed in the IC-A120E, the radio can be wirelessly paired with a non-Bluetooth® headset. Using the optional Icom Bluetooth® VS-3 headset also provides the listening function.

Dust and water protected according to IP54
The IC-A120E is IP54 protected against the ingress of dust and water. Therefore, it can be mounted and operated on open vehicles without a canopy.

Automatic search and dual watch function
If you hook the microphone into the microphone suspension and the corresponding function is activated, the search starts automatically. Alternatively, you can also turn on the dualwatch function automatically when hooking up the microphone. As soon as the microphone is removed from the holder, the scan stops on the priority channel or the channel currently displayed, depending on the pre-programming.

Listening-in function
If you are using a third-party headset with the optional OPC-871A headset adapter, you can monitor your own voice over the headset. You can also hear your own signal when using the handheld microphone.

Optional speaker microphone HM-217
Receive signals can also be heard through the speaker built into the HM-217 microphone. The up / down buttons on the front of the microphone and the two programmable buttons (P1 / P2) allow direct access to frequently used functions.

Other features
A total of 200 memory channels with up to 12 characters long name / 12 V and 24 V power supply possible / 8.33 kHz and 25 kHz channel spacing / 36 W (PEP) output power / dualwatch and priority search / power-on password protection / PC -programmable / CI-V commands for remote control / RoIP-Gateway VE-PG3 for coupling with other radios / Complies with the European E-Marking for installation in vehicles

Delivery:

• Handheld microphone HM-216
• Power cable
• Mounting kit ("U" mounting bracket)
• microphone hanger
• fuses

Optional accessories:

• Bluetooth® unit UT-133A
• Bluetooth® Headset VS-3 (can be used with the UT-133A)
• handheld microphone HM-216 (as supplied)
• Speaker microphone HM-217
• Headset adapter OPC-871A for the connection of flight radio headsets from other manufacturers
• RoIP gateway VE-PG3 and cable OPC-2275 for coupling to other radios

NOTE:
The IC-A120E is intended for use on the ground only. It can not and may NOT
Board of aircraft or used as a main radio.